This preliminary step increases the metal concentration at the electrode surface and enhances the sensitivity of the stripping step ( Mohadesi and Taher, 2007 and Yantasee et al., 2004). In this study, a novel carbon paste electrode (CPE), containing microspheres of chitosan crosslinked with 8-hydroxyquinoline-5-sulphonic acid and glutaraldehyde (CPE-CTS) for determination of Cu(II)

by square wave anodic stripping voltammetry, was constructed. Experimental conditions affecting the pre-concentration step, including the solution pH, potential and time of pre-concentration, were evaluated. Although the proposed sensor can be used to determine other heavy metals, Obeticholic Acid order since microspheres of chitosan crosslinked with 8-hydroxyquinoline-5-sulphonic acid can act as an adsorbent for several metallic ions (Vitali et al., 2008), the performance of the proposed sensor was examined using optimised operating parameters for Cu(II) determination in instant coffee samples. Copper was chosen as the test element because it

has been found to be best suited to identifying the geographical growing origin of coffee, together selleck products with manganese and cobalt (Oleszczuk et al., 2007). Therefore, the main goal of this work is to show that the proposed CPE-CTS sensor can be successfully used to determine Cu(II) in instant coffee samples. The determination of metals in coffee is commonly carried out in green coffee. To the best of our knowledge, the determination of Cu(II) in instant coffee is shown here for the first time. All reagents were of analytical grade and all the solutions were prepared with ultrapure water obtained from a Millipore Milli-Q system (18.2 MΩ cm). Chitosan (deacetylation learn more degree of 80%), 8-hydroxyquinoline-5-sulphonic acid, glutaraldehyde and copper nitrate were acquired from Sigma. Graphite powder and Nujol were purchased from Fischer Scientific and Aldrich, respectively. Acetate buffer (0.1 mol L−1, pH 4.0, 5.0 and 6.0); tris(hydroxymethyl)aminomethane (0.1 mol L−1, pH 7.0 and 8.0) and ammonia (0.1 mol L−1, pH 9.0 and 10.0) solutions were tested as supporting electrolytes. Square wave

and cyclic voltammetry experiments were performed on an electrochemical detector, a Voltalab PGZ-100 potentiostat/galvanostat (Radiometer, Copenhagen, Denmark), equipped with a three-electrode system: a carbon paste electrode containing crosslinked chitosan (CPE-CTS) as the working electrode, a platinum wire as the auxiliary electrode, and an Ag/AgCl electrode as the reference electrode. The system was coupled to a microcomputer and controlled by VoltaMaster 4.0 software (Radiometer, Copenhagen, Denmark), for data acquisition and subsequent analysis. The weighing of reagents and mineralisation of coffee samples were carried out on a Shimadzu analytical balance, model AY-220, and in a Jung muffle, model BTC-9090, respectively.