16 × 106 m3 s−1 over the 2006–2009 period. The present paper aims to: (1) study the baroclinic water exchange through the Gibraltar Strait and Sicily Channel and (2) examine the heat and water balances of the WMB and EMB. The paper

uses a two-basin model to estimate the heat and water balances of the WMB and EMB. The model simulates the properties of the two sub-basins based on horizontally averaged advective–diffusive conservation equations for volume, heat, momentum, and salinity, including a two-equation turbulent model, and uses the documented and freely available PROBE equation solver NVP-BGJ398 cost (see Omstedt, 2011). The present model version, PROBE-MED version 2, is freely available from the lead author, including forcing fields. The meteorological input data for PROBE-MED version 2.0 were horizontally averaged using linear interpolation over the two sub-basins. Exchange through the Gibraltar Strait and Sicily Channel was calculated assuming geostrophic baroclinic water exchange. The strength of the approach is that it simply but realistically integrates a large amount of available information

extracted from a number of data sources such as: 1. Digitized bathymetric data with a 0.5-min spatial resolution. These data, which were extracted from the British Oceanographic Data Centre and are available via the Centre’s website (http://www.bodc.ac.uk/data/onlinedelivery/gebco/), were used to calculate the area/depth distribution of the WMB and EMB. PROBE-MED version 2.0 was designed for analysing the water and heat balances in the WMB and EMB. The modelling approach JAK inhibitor review uses the PROBE general triclocarban equation solver (Omstedt, 2011 and Shaltout and Omstedt, 2012) and couples the two sub-basins using models of the inverse estuarine circulation. The basic model dynamics apply a transient Ekman flow model in each sub-basin with in- and outflows calculating the inverse estuarine circulation. A two-equation turbulent model of the turbulent kinetic energy (k) and its dissipation rate (ɛ) was used to estimate the turbulence in the surface boundary layer. In the deep layers, the deep-water mixing was parameterized based on the stratification.

The turbulent model’s initial conditions for the turbulent kinetic energy and its dissipation rate assumed constant and small values. The initial temperature and salinity conditions for the two sub-basins were taken from January 1800 to avoid spin-up calculation errors. The present WMB simulation was forced laterally using Atlantic Ocean surface properties (annual average values of 19°C and 36.85 g kg−1). The model was run from 1800 to 2010 with a vertically resolved 190-cell grid extending from sea surface to sea bottom for a 600-s temporal resolution. In the 1800–1957 period, the model was forced using the average climatic values to reach the equilibrium state, while after 1958, the model was forced using high-time-resolution forcing data.